What I Did On My Solar Vacation

The Journey to Solar
My family’s love affair with solar started when I was a kid, back in the 1970s, experiencing fuel rationing during OPEC. President Jimmy Carter provided $5000 to install passive solar systems on the homes of regular American citizens. This fabulous system was based upon the idea of water heated through the sun’s energy, moving through a series of pipes, going throughout the house, to warm it for the winter. My father, an exceptionally frugal, resourceful and handy man, with 7 growing kids and a wife, eagerly installed it himself on our sturdy mid-1800’s era farmhouse here in Thomasville. I still remember how our Depression era-raised father, looked at our thermostat on the first bitter winter day after installation and euphorically proclaimed “We are saving so much money!” This was not a man given to emotional display and was the first and only time I ever heard him say this in my entire life. It was literally a life changing moment, and it stuck with me over all these years. Decades went by and our passive solar system went the way of the dinosaur when my father had died and parts aged and no one could be found to replace the system. Many years after I left the home I grew up in, we bought it back as adults. We set about restoring not only an aged home, but we vowed to replace the solar power on the house to make it feel whole again, both physically and emotionally. And now, finally, its happened!

The solar company I chose to use is Sundial Solar,  based out of Minneapolis, Minnesota, and run by an extremely experienced, energetic and knowledgeable installer named Jon Kramer. He has installed solar for decades, works all over the country, and has a team of 20 highly motivated experienced workers.

Learning
Practical knowledge I learned myself about solar, was from online sources and from books at the Glatfelter Library in Spring Grove. I started attending national and Learning_bloginternational solar conventions held here in the US, and asking a lot of questions from those most qualified to provide what I wanted. I saw how the whole world was investing in it, except for America. This is strange considering the technology was invented here. Americans like to claim we are number one, but we certainly are not when it comes to 21st century energy sources. Yet Defense contractors all over the world use solar power. NGO’s operating hospitals and health centers in regular or disaster-affected areas use solar power. Even the Amish, our wonderful neighbors who mostly don’t even use electricity, have solar farms and sell the power as if it was a CROP. There are so many widely used, affordable and modern practical applications for solar energy today. This is not your grandad’s Carter Era solar anymore!

Fossil Fuels
Basically what solar does is cut out the energy middleman, of which there are many! Lets look at coal. It is the product of sun energy feeding plant life that was living millions of years ago. These plants were then buried and condensed into hard carbon-rich rock. To fossil fuels_bloguse coal as an energy source that rock must be excavated, sorted, crushed, cleaned, shipped, crushed some more, transported again, and finally burned. Then the resulting ash – rich in toxins – must be dealt with. Mining coal ruins our environment (“mountain top removal” – how insane is that?!). It poisons the air we breathe and the water we drink. It has reliably killed many, many people for hundreds of years through cave-ins, mine disasters, underground fires, and respiratory disease.

You and Solar
So, how do you go about learning about solar energy? When you have the desire to have solar installed on your place, whether commercial or residential, you should go to the online site called the Database of State Incentives for Renewables and Efficiency – aka DSIRE, a magnificent database that tells you about the funding sources available to your area. The DSIRE website will guide you, beginner or not, through a many layered wonderland of grants, updated technical information, and basically just help with research-related questions.

If you decide to go solar, first thing is save your pennies. Solar systems cost money to put in, same as a wood stove, or a natural gas furnace. And it increases the value of your home. How long will it take to pay it off? A lot depends on how much energy you use, how much you paid for it, and how efficient you are. Those big outside security lights cost a lot to run. (We have since replaced them with solar ones attached to motion detectors.) Costs of solar have dropped significantly as it is becoming more commonly used throughout the world.

Anyone who complains solar doesn’t pay off quick enough is sadly unaware of the modern solar world. No matter which way you slice it, in the long view solar is CHEAPER than grid power. And grid fuel costs will constantly go up, while the fuel for solar systems is free forever. Here’s what I did:

Permits and Paperwork
You will read this article and get excited about solar, and you will go to your local township and rave about it. Your local Zoning guy, if its like my guy Ray Dietrich at the Jackson Township office, who will cast a patient, experienced gaze upon you and pronounce “This is a great idea. You need permits for that. You will have to pay a fee after permits and paperwork_blogits been approved. (under $200 for both permits) Lucky I got you covered with all the right paperwork!” You will need to fill out a Proposed Use Permit Application. There will also be paperwork involving the Commonwealth Code Inspection Service. Your township office will have everything for you. You will have to fill out everything and then include specifics about every bit of equipment involving your system and how it will be part of your house. Then you call up Met Ed and talk to someone who will direct you to the Metropolitian Edison Company Retail Interconnection paperwork. You will have to submit your application and supporting documents like a Level 1 Application/Agreement, Site Plan Example, a one line diagram, and the application fee, which is $100 for a house. Then submit all your stuff to Met Ed. Any questions, then send an email to me_interconnection@firstenergycorp.com.

Your existing meter on your house has its own number, did you know that? It’s not hard to find, call up Met Ed and find out. You will have to make sure you show a very specific, very comphrensive line diagram showing how one part corresponds to another. And when the entire experience is done and solar is on your roof there will be yet another form to fill out at the end, mine was called First Energy Interconnection Application Agreement, part two.

Electrical Concerns
Protect your health and the safety of your structure when you have solar installed, and have an experienced team, like my team, at J Miller Electric in Spring Grove. They will electrical team_blogwork directly with your solar installer who will guide them along the way for any specific needs, if the solar team does not do the electrical install themselves. For my solar install, I was required to have local electricians, and I loved this, because I was able to call upon people I trust. J. Miller Electric crew completely wired my ancient barn. They fixed my house after it flooded. They fixed it after an Utz truck hit it. Trust me, these are great guys and are up for anything. They will have to have access to the inside of your house to your electrical panel and install what is needed there to hook it up to your existing electrical system. They will also have to work on ladders on the side of your house bringing a line down to your meter. They will have to drive a grounding rod into your ground by the side of your house, so pay attention to this in particular because if you have something weird and old buried in your yard, the saying “out of sight- out of mind” really does apply here. You certainly don’t want to pierce a water line or any buried electrical wires or discover and fall into a buried well or any such nonsense as that, trust me. Knowing beforehand what is buried in your yard, in any area that is going to have work done right there is extremely helpful.

Ah, Paperwork
Paperwork is a wonderful uplifting part of life, right? I just love it. I have several avalanches worth of it in my office. You can NOT avoid paperwork when it comes to filling out the correct form, correctly. I filled out several for my local township office, and one for Met Ed called a Level One form for residential. A level 2 form is for commercial properties that will have a MUCH higher level of generation than a smaller one on your house will. Many times people forget that a solar field, placed next to your buildings, instead of directly affixed on it, is a wonderful way to generate your own electricity. I urge anyone zoned clean and green to GET SOLAR panels somewhere on your property, whether in a low wet area that is not much good for anything, or in any area well positioned to capture as much solar energy as possible. Even on a house or in a location shaded with trees, remember, those leaves will fall off in the fall, and you will have beautiful clear skies in late fall, the entire long cold months of winter and early spring. Depending on your energy use (look over your electrical bills for this) you may very well be able to generate more electricity then what you yourself actually use. You will be able to sell it to Met Ed, who is eager to buy it from you, to be able to sell it to someone else. Using electricity is not going out of style, and local municipalities don’t want to raise taxes to fund a new power plant that will cost millions or billions, and decrease property values in the area its built. It’s much better to be able to produce electricity locally and sell it back locally.

Politics and Funding
Depending on who is in political office goes a long way towards getting funding for grants and incentives to help home and business owners install it on their buildings or land. I will get a federal rebate when I do taxes next April, of at least 30%. These run out at the end of 2016, so if your thinking of getting solar installed, step on it. Who knows if these will get renewed, as many things are based on who is holding political office. Gov. Wolf, who hails from York County, is working on passing a bill that would increase funding for green energy projects throughout our state, but much of it depends on getting specific bills passed. I always call up my elected officials who represent York County, and tell them to strongly support any green and renewable energy funding for Pennsylvania. For real. This is a great example of showing how being involved in Politics actually will affect your life directly.politics andf funding_blog

If specific bills get passed, state incentives that have run out, and were not renewed under former Gov. Corbett can be brought back to life again and Pennsylvania citizens can quailify and apply for state incentives, as well as existing Federal ones. So prepare your votes, your finances, site plans and permits and get ready to install solar with the added incentives that will come your way if conditions are directed in the proper direction with strong support for solar and responsible energy generation.

Materials and Delivery
Now, your concerns will be ordering materials, inspection upon their delivery, and storage until actual use. Your solar company will know exactly what to chose for your project from an array of options. There will be a variety of choices for them to make for you, depending on the type of system you want, either residential or commercial, roof-mounted or ground-mounted. Once these things are on their way to you, and get delivered, someone will have to be present at the work site to take a receipt of the materials being delivered. These companies are professional and will NOT make delivery unless someone will be there to conway trucking_blogsign for your wonderful equipment. I used Conway Trucking, who got my entire shipment delivered here in two trips from Alburqueque New Mexico in about a week. Upon delivery, the solar panels were delivered on a custom made wooden skid, because these are not going to fit a standard sized wooden skid and you really don’t want the edges to overhang a conventional one and get all broken up and smashed. Even though mine were delivered in perfect shape (Conway is awesome!) I still worked with a patient driver to hand down each and every single panel by hand and inspect them all. Trucks bonk over holes and debris in the road all the time, and any particularly unpleasant jolt will smash the weight of the upper panels down on top of the bottom ones. Very unfortunately for you, all of a sudden the 18 panel solar array turned into a 14 panels one, and you don’t have an panel delivery_blogextra week to get additional ones delivered. I was looking for cracked or shattered glass, or damaged metal edges, and found none, thankfully. Immediately after ascertaining things were fine, I stack the panels SIDE by SIDE, standing on their edge. You may be handed a manifest that details everything delivered to you. GO THROUGH THIS, and make sure of everything, even though your trucker guy is impatient to get back on the road and make his next delivery. If you don’t have everything you need, you are stuck at a work site later paying for workers to sit around and twiddle their thumbs because you were not through about your job a week earlier. Once everything shows up in good condition, then and only then do you sign a bill of lading that your friendly trucker guy hands over to you.

Weather
The weather is going to screw you over no matter what, so just plan, and plan again. Try to have a day or two extra in order to accommodate unforeseen events that will always pop up. Spring has many wonderful days in it, and will also have days that will screw you over when it comes time to plan for outside activities. The best time to install solar is when the ground or the roof is not covered in 4 feet of ice and snow. Sounds sensible, doesn’t it? Very windy, wet rainy tornado hurricane-type weather is not good. Storms have electricity jolting all over the place and you do not want to be on a metal roof or a metal scaffold when Zeus starts tossing those thunderbolts around, so get DOWN from your high perch and be careful with yourself. Things will dry out and become safe to work on again. I promise you. As it was we had torrential rains of 3 inches the night before the last day of install, and it was remarkable how the clouds cleared away exactly when we needed them to.

Scaffolding and Your Safety
I had been told by my solar guy that we needed to use a particular type of scaffolding that has steps, NOT ladders. This is actually harder to find then it sounds. It is primarily used on church restorations, by workers that are carrying large objects up and down, not scaffolding_blogjust ferrying them up by a crane or packed in a backpack as you crawl up and down a ladder. I called around to many places and the only scaffold business who had what we needed was up in Harrisburg. We ordered it from Safway Scaffolding in Harrisburg, about an hour away, who delivered on time and behaved well above and beyond a typical business in responding to any interactions I had with their service and equipment. One of their employees drove out on a Sunday afternoon in response to a query about assembling the equipment. The reaction of my solar guy, who has assembled hundreds of scaffolds for projects, was to say “Now that’s what I call great service”. You can pay to have it delivered and assembled. It is possible to assemble this yourself, which is how we did it, provided you have about 3 or 4 very fit, very competant individuals who are well able to lift heavy objects high above their heads and have a decent workable understanding of how these things are put together. Building it is one thing, using it is another. Safway recommends taking an online test to obtain “competant status” regarding scaffold use, which is a nice safeway scaffolding_blogway of saying please pay attention to details and do everything OSHA tells you and you will come out of your scaffolding experience alive. If you are not wearing a hardhat, somebody’s gonna lose an eye, and if improperly rigged up, you will die if you take one wrong step. Always follow safe practices, and check on each other, your life is worth it. You want to be around to enjoy your solar system, and 25 years is a long time!

Preping
Once on the roof, we treated rusty spots in the metal with a bit of light sanding, and pretreated it with a shot of rust inhibiting metal primer, followed by a coat of Rustoleum metal paint or enamel, since the roof will be covered over for literally 25 years with this new system. The sun and heat of the day will dry the primer and paint very quickly. This is a good time to mention that you need to drink a lot of water, and take breaks every 2 hours or so, a 70 degree day with full sun beating down on you with no breeze will raise the temperature of your roof to easily 20 degrees higher. Now imagine doing this on a 90-degree day. Completely slather yourself with sunscreen and wear sturdy jeans and long sleeves.

Installing the Physical Support System
When this quick and easy paint job is done, the S-5! Clamps are attached directly on the clamps_blogupraised ridges of the roof. There are different heights of roof ridges and this is something that has to be pre-measured to know exactly what size of clamp will accommodate not only the roof, but support the type of racking and panels you will be attaching later. Then these get tightened through a series of bolts that use pressure to tighten them and keep them, and your panels, off the roof. The racking system is what you call the long supporting metal bars, or “rails” that will be attached next, horizontally across the surface, and each one is screwed in by a screw gun, using hex bolts. I recommend using battery powered tools, and avoid electrical cords at every opportunity, no one wants to get their feet tangled up in cords while balanced on the edge of a roof and fall down to their death. Always plan for safety first.

racking_blog

Installing Electrical
Next, the electrical components go on, each Enphase microinverter is attached to a stainless steel bolt placed across the surface of the racking system. These things are going to be outside for decades and your bolts need to be stainless steel. Turns out we were not shipped enough, and I had to make a quick run to Forge Hardware in Spring Grove. inverters_blogDarlene who runs the place has pulled me out of many a “home improvement/water barrel building/what was I thinking of” crisis and always has what I need on hand, from the most common to the most obscure tool or material. I simply love my local hardware store, they have made themselves indispensible. Saved me time making a trip into Hanover or York as well.

Setting Up the Panels
Depending on which size you get, they can be easy or a bit of a struggle to get up to the roof. Turns out that the ones we got with the configuration of scaffolding used, still were panels_blogtoo large to be hand-carried up the scaffold, so a pulley system was set up and each panel was lifted by rope and grabbed by our solar guy on top. Then attached wires were untaped and it was quickly secured onto the existing electrical microinverter and physical racking system. With a few bolts attached to keep panels from bumping into each other, your system is now physically installed! The rest is up to the electrical team to finish off.

Monitoring System
For an additional fee, you can have a monitoring system set up, inside your house. Always plug directly into the wall outlet and not a power cord, which will literally allow you to go online and set up an account that will allow you to monitor the output of electricity that each panel produces. You can see when you make more then you use, and you can detect if there are any faulty panels. (it happens, rarely). You can literally check this online from anywhere in the world. If you have solar installed on a vacation home or cabin somewhere else, you can monitor it easily as well, without even being there.

You Now are Solar-rific!
Things to do when your are done- jump for joy! Call up Met Ed immediately and tell them to install a bi-directional meter. This will now replace your old meter with one that goes forwards for when you use regular electricity, like during the evening hours, and also go backward and make you money when your system is powered by the sun and is so efficient you can’t possibly use it all. I have to say when it’s all said and done it is an energetic and deeply rewarding experience and one of the best decisions I have ever made, and I look forward to using this system for the next 25 years!

solarific2_blog

3 thoughts on “What I Did On My Solar Vacation

  1. Really inspiring! I wonder, could you use both solar electric and solar hot water if you wanted to? I guess it depends on how much roof surface you have.

  2. Yes! It is very possible to have both passive solar on your building, because that will provide heat for the place as well as heat all your hot water. And when you have a photovoltaic system on your house, it provides electricity to run everything that needs electricity, during the hours that sunlight is shining. It is also possible to get a photovoltaic system that has storage capacity batteries, ( more expensive) to store energy to be used during the hours the sun is not shining. It’s a fabulous system, and widely used all over the world, just not here in the U.S.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>